Cutting process of ceramic blocks production

Ceramic blocks units are typically used in many kinds of heaters and furnaces of RTO, and widely used in the industries of petrochemical, pharmaceutical, chemical, electric manufacturing, automobile and machinery manufacturing, metallurgical, paint, printing, paper, wood processing and others who needs to dispose exhaust gas.
As a professional export supplier of ceramic honeycombs, our factory has a strict quality control system.
We have a semi-product quality control lab between the microwave drying and cutting process, mainly equipped with an outer diameter tester, electronic scales, straight angle measure to control the appearance of semi-finished products, size and quality.

评论

发表评论

此博客中的热门博文

Higher efficiency of Metal Cascade-mini ring

图片
The preferential orientation of the packing, resulting in most of the metal cascade-mini ring surface being positioned efficiency. Vertically in the tower rather than horizontally, is also advantageous for mass transfer. It is very important that as much of the available surface area as possible be effectively wetted. The underside of any horizontal surface in the packed bed is shielded from the liquid trickling down and is therefore not effectively wetted.                                               By definition, these dry surfaces take no part in the mass transfer process and are lost. Packing significantly reduces this effect, and therefore improves efficiency.   CMR         
阅读全文

How can we extend the usage of RTO blocks to avoid to be damaged?

How can we extend the usage of RTO blocks  to avoid  to be damaged?  You can do like followings: 1.Try to put the blocks in order when you install the block; 2. Keep expansion gap every 1 centimeter per 1meter evenly distributed when place the blocks; 3. The speed of temperature rise and fall should not be too fast, otherwise it will easily cause cracking in the regenerator product. Within 300°C, the heating rate is ≦ 30°C/h, which mainly excludes adsorbed water; when the temperature is 300-600°C, the rate of temperature rise and fall is 60°C/h, and when the temperature is higher than 600°C, the rate of temperature rise is ≦ 120°C/h; when the temperature is lowered, the temperature is lowered. Speed ≦ 60°C/h; 4.In the working conditions, if there are too many nano-dusts (silicon, organic titanium, etc.), the pores of the regenerator product will be blocked, causing uneven temperature and pressure, and finally leading to product crackin; ...
阅读全文

Our factory of monolith for RTO

图片
The fac tory we allied with was established in 1992, has been successfully engaged in the fields of mass transfer for about thirty years.  We are the class-1 supplier of Sinopec 、 CNPC 、 CNOOC and Sinochem Group and other  large enterprise . As a member of China National association of innovation, we are also closely related with several famous universities and institutes with the best ceramics laboratories. With the strong capital and technical strength, standardized management, as well as years of cooperation with experts and professors from scientific research institutions and famous universities, we set up an advanced production line of monolith. With specific material processing method and unique production process, we carry out the products with high specific heat capacity, high surface area, good thermal conductivity, thermal shock is greatly improved, which greatly prolong the product life. We can provide the best cost-effective monolith.
阅读全文